Elite Strongarm & Firestrike Integration!

   This here is my elite sidearm that I made. It's nothing special but is quite effective and fun to use. Below is an integration of the Elite Strongarm with a minimized Firestrike integrated into the bottom of it. More after the jump.

^I actually like how you see some rays of light on the pic above^

Firestrike modifications:

AR removal (+ the peg)

Air Hole Plugged

Slight minimization

   Not much had to be done to it since I'm wanted to integrate the firestrike as a back-up shot for my Strongarm.

------------------------------------------------------------------------------------------------------------

Strongarm Modifications

AR removal

Dart Peg Removal (plus cleaned up barrels)

Lock Removed

Air release hole plugged

------------------------------------------------------------------------------------------------------------

   First what I did is I modified the Firestrike and then the Strongarm. I did the mods listed above. I then cut down on the Firestrike even more with a sanding bit on my rotary tool to fit in smoothly underneath the Strongarm. After that I epoxy puttied the two halves of the shells together and [carefully] put both of the shells back together. It was not anything really difficult. 

 <--- A more clear pic of the blaster to the right  

 Overall this mod turned out well, and I ended up liking it even though I thought I wouldn't when I started. I am going to get some paint soon to paint the epoxy to make the blaster look better. If there is any questions or anything I should add please let me know in the comments below the post because I feel like a left out something...

~Zero