Friday, December 30, 2011

nerf speedswarm

                                                                 I got a speedswarm!!!!
         I found this at target for 19.99 and just had 2 get it and I also saw a rayven there for 29.00.

Thursday, December 29, 2011

Nerf Recon Stock Mod by jds8585 :P

1st. Take apart the clip holder
2nd. Pull the safety pins out of the stock that holds it to the connector piece, ( there are 2 of them, i would use a hammer and small screwdriver, i used a rock and a thumbtack... maybe some pliers )
3rd. Get a fury fire cylinder/turret ( experiment with different turrets/ cylinders. ex: barricade cylinder, spectre cylinder, maverick cylinder etc...)
 4th. Slide the cylinder/turret on the BOTTOM rod of the recon stock
5th. In the clip holder, there is a piece of plastic the goes in the hole on the recon stock, snap that piece of plastic off and slide the top guide hole onto the bottom rod on the stock, holding the turret/ cylinder in place
6th. When your done it should look like this ( maybe with a different cylinder)and it should still hold clips.
- jds8585 Happy modding : )

Tuesday, December 27, 2011

12 volt nerf stampede

                                 Today I'm going to show you my 12 volt Nerf stampede.

Side view.
Here's the battery pack with that holds 8 AA batterys.

Sunday, December 25, 2011

nerf spectre mod

                                                     Today I'm going to show how to mod a Nerf spectre.

                                                                we will start by opening the gun.
Now unscrew the 5 screws on the bottom of the barrel.
Now pull theses out.
Throw this stuff in the garbage.
Cut here with pliers.
Place whats left back in the barrel.
Screw everything back together and your done.

Thursday, December 22, 2011

glow in the dark nerf darts

                                         I saw some glow in the dark darts at target today!

Friday, December 16, 2011

nerf switch shot mod

                                      Today I'm going to show you my Nerf switch shot.

                                      Mods//AR//plugged air release hole//stretched spring//

Wednesday, December 14, 2011

nerf longshot front gun integration

                       Today I'm going to show you my Nerf longshot internals coming soon....

    Mods/ /main gun//ARs// barrel post//3 springs//front gun integration//stock block//added o ring //front gun//ARs //rebarreled with mav barrel//added o ring//.

Friday, December 2, 2011

nerf Stefan's tutorial

                      Today I'm going to show you how I make my Stefans!

              First cut you foam backer rod to the length you would like, I cut them to 1.5"
After you have cut your fbr, get a pillowcase and put your foam in the pillowcase, then throw the pillowcase in the dryer for 10 minutes on medium

This is what your fbr should look like when they are done in the dryer.
Now burn a small hole in your dart with a hot glue gun, and place one .177 BB in the hole.
Now make a hot glue dome on top of the BB and your done.