Wednesday, May 9, 2012

My Nerf Hopper Clip!

Hey guys i'm back! This is just a little post to get back into it :) I followed ploppers post for the wye here (Thanks plopper)




Nothin "fancy" mostly going to be used for my titan (post coming soon)
Bright pink tip, just incase :P
Black= PVC wye
Red= 1/2 PVC
Blue= 1/2 CPVC
Green= darts
-------------------------------------------------------------------------------------------------------------
I am not a good at drawing! It was only to give you an idea of how I did mine! It's not perfect!

More post coming soon, thanks for reading!

-iModify-

10 comments:

  1. Wow, wonderful looking as always, Can't wait to see your titan in full form!

    ~Wing

    ReplyDelete
    Replies
    1. NP, wait, did you get your camera back?

      Well, anyways, good job, keep it up, I check every day about 3-4 times :)

      Delete
    2. Oh, nice picture by the way.

      Delete
    3. 1. Naw it's my moms camera.
      2.I appreciate that you check this blog that much :P
      3. Thank you thank you thank you :D

      Delete
  2. Your welcome...

    ReplyDelete
  3. I'm using a 1/2" CPVC to 1/2" PVC reducer that connects to a length of CPVC for my barrel. For some reason, it takes me 2 shots to shoot 1 dart. The first shot gets it stuck in the barrel, then the second shot fires it. Any idea why???

    ReplyDelete
    Replies
    1. I've never seen a 1/2 CPVC- 1/2 PVC reducer before.

      What blaster are you using?

      Cut down the CPVC barrel!

      Delete
    2. I have beveled out the CPVC into a nice cone, but my darts don't make it through. I'm using a BBB with a K26. Is my blaster too weak?

      Delete
    3. BBB's don't work well with hoppers, try making a RSCB clip. It will work 100% better! If you don't know how to make one here's my video tutorial: http://www.youtube.com/watch?v=_HNdQ-GMFvw&feature=BFa&list=PLB248034EABB08E2E

      Hope this helps. :)

      Delete

Let Me Know What You Think!