Give-A-Way item!

So the Panther got the most votes for what the giveaway item was gonna be, so iMade one for iMod to give away :)

Wont come with hopper, but I like to use the setup shown above.

Ranges with a single barrel- Avg. 10 pumps: 96ft. with slugs (#6 washers)

Ranges with a single barrel- Avg. 15 pumps: 108 ft. with slugs (#6 washers)

3/4-1/2" Reducer bushing with all dead space killed.

The pump shaft is made from about 5" of CPVC with a 1/2" stub of 1/2" PVC hammered on. Then I screwed on a SCH 40degree elbow and added about 3" of PVC (shown below)and added a SCH40 45degree elbow (shown below)

You can see that the shell work is very clean. I seated the bushing inside the shell. This takes a steady hand and patience, but I pulled it off pretty well. The hole in the elbow happened when I tried to drill a hole for a screw to fit, but I had a little spasm and made this piece of doodie. :(

I've signed it up in the top triangular area. iMod, there's a spot reserved for your name where I'm pointing

Another view at the bushing and the pump handle

^^And another^^

So if you want a chance to win this beast of a sidearm, then enter the giveaway!
thanks for reading!
~Kimosabi