Before I start go follow Drev's blog ==>FlyNerf he was awesome enough to save me 50' before he sold most of his batch!
.JPG)
.JPG)
.jpeg)
.jpeg)
(Click Read More!)
Once I cut a couple blanks, I found that using a sawing motion worked best. (The dart far left was cut using one swipe, doesn't work well)
As you can see the pink foam is SUPA dense compared to BestMaterials foam.
You have to use a low temp glue gun for this foam or else the whole dart will be melted. for beginner dartsmiths i'd have to recommend BestMaterials foam, bit if you're more experienced then Drev foam is the way to go!
overall rating: 9/10
========================================================================
Thanks for reading!
-iModify-
(+bow coming in the future!)
Thanks for the review! With my razor blade I can cut it in one motion. Also, with a dual temperature hot glue gun the foam works on both temperatures(I just figured that out yesterday). Once again, thank you.
ReplyDeleteAnytime! You must have a super sharp razor then :P
DeleteYou'll see.
ReplyDeletehey i was wondering if u could maybe sell me a few feet of neon pink foam backer rod
ReplyDelete