Friday, December 30, 2011
Thursday, December 29, 2011
Nerf Recon Stock Mod by jds8585 :P
1st. Take apart the clip holder
2nd. Pull the safety pins out of the stock that holds it to the connector piece, ( there are 2 of them, i would use a hammer and small screwdriver, i used a rock and a thumbtack... maybe some pliers )
3rd. Get a fury fire cylinder/turret ( experiment with different turrets/ cylinders. ex: barricade cylinder, spectre cylinder, maverick cylinder etc...)
4th. Slide the cylinder/turret on the BOTTOM rod of the recon stock
5th. In the clip holder, there is a piece of plastic the goes in the hole on the recon stock, snap that piece of plastic off and slide the top guide hole onto the bottom rod on the stock, holding the turret/ cylinder in place
6th. When your done it should look like this ( maybe with a different cylinder)and it should still hold clips.
- jds8585 Happy modding : )
2nd. Pull the safety pins out of the stock that holds it to the connector piece, ( there are 2 of them, i would use a hammer and small screwdriver, i used a rock and a thumbtack... maybe some pliers )
3rd. Get a fury fire cylinder/turret ( experiment with different turrets/ cylinders. ex: barricade cylinder, spectre cylinder, maverick cylinder etc...)
4th. Slide the cylinder/turret on the BOTTOM rod of the recon stock
5th. In the clip holder, there is a piece of plastic the goes in the hole on the recon stock, snap that piece of plastic off and slide the top guide hole onto the bottom rod on the stock, holding the turret/ cylinder in place
6th. When your done it should look like this ( maybe with a different cylinder)and it should still hold clips.
- jds8585 Happy modding : )
Tuesday, December 27, 2011
Sunday, December 25, 2011
Thursday, December 22, 2011
glow in the dark nerf darts
Friday, December 16, 2011
Wednesday, December 14, 2011
Friday, December 2, 2011
nerf Stefan's tutorial
Today I'm going to show you how I make my Stefans!
First cut you foam backer rod to the length you would like, I cut them to 1.5"
After you have cut your fbr, get a pillowcase and put your foam in the pillowcase, then throw the pillowcase in the dryer for 10 minutes on medium
This is what your fbr should look like when they are done in the dryer.
Now burn a small hole in your dart with a hot glue gun, and place one .177 BB in the hole.
Now make a hot glue dome on top of the BB and your done.
Subscribe to:
Posts (Atom)