nerf speedswarm

                                                                 I got a speedswarm!!!!
                     
         I found this at target for 19.99 and just had 2 get it and I also saw a rayven there for 29.00.

Nerf Recon Stock Mod by jds8585 :P

1st. Take apart the clip holder
2nd. Pull the safety pins out of the stock that holds it to the connector piece, ( there are 2 of them, i would use a hammer and small screwdriver, i used a rock and a thumbtack... maybe some pliers )
3rd. Get a fury fire cylinder/turret ( experiment with different turrets/ cylinders. ex: barricade cylinder, spectre cylinder, maverick cylinder etc...)
 4th. Slide the cylinder/turret on the BOTTOM rod of the recon stock
5th. In the clip holder, there is a piece of plastic the goes in the hole on the recon stock, snap that piece of plastic off and slide the top guide hole onto the bottom rod on the stock, holding the turret/ cylinder in place
6th. When your done it should look like this ( maybe with a different cylinder)and it should still hold clips.

- jds8585 Happy modding : )

12 volt nerf stampede

                                 Today I'm going to show you my 12 volt Nerf stampede.

Side view.

Here's the battery pack with that holds 8 AA batterys.

nerf spectre mod

                                                     Today I'm going to show how to mod a Nerf spectre.

                                                                we will start by opening the gun.

Now unscrew the 5 screws on the bottom of the barrel.

Now pull theses out.

Throw this stuff in the garbage.

Cut here with pliers.

Place whats left back in the barrel.

Screw everything back together and your done.

                                      

glow in the dark nerf darts

                                         I saw some glow in the dark darts at target today!

nerf switch shot mod

                                      Today I'm going to show you my Nerf switch shot.

                                      Mods//AR//plugged air release hole//stretched spring//

nerf longshot front gun integration

                       Today I'm going to show you my Nerf longshot internals coming soon....

                                                   
    Mods/ /main gun//ARs// barrel post//3 springs//front gun integration//stock block//added o ring //front gun//ARs //rebarreled with mav barrel//added o ring//.

nerf Stefan's tutorial

                      Today I'm going to show you how I make my Stefans!

              First cut you foam backer rod to the length you would like, I cut them to 1.5"

After you have cut your fbr, get a pillowcase and put your foam in the pillowcase, then throw the pillowcase in the dryer for 10 minutes on medium

This is what your fbr should look like when they are done in the dryer.

Now burn a small hole in your dart with a hot glue gun, and place one .177 BB in the hole.

Now make a hot glue dome on top of the BB and your done.

homemade nerf nite finder

                                      This is my nerf nite finder that I made out of old parts.

Here is the plunger rod with a NF spring and a switch shot spring.

The plunger tube was broke so I hot glued a nerf  maverick barrel on it.

Here is the internals I added the dart holder that was under the laser and hot glued it in the handle.

nerf dart mod

                    Today I'm going to show you how to mod a nerf suction dart

first find a suction dart and get a knife/scissors.

cut here.

this is what it should look like when your done.

the dart should go about 5 feet farther.....it does not suction any more.

results may be different with other Nerf guns.

nerf tech target coupler mod

normal nerf darts are to small for the tech target barrel so I'm going to show you a mod that will fix that

                               first get a spare maverick barrel take it apart and grab this part

next widen the inside of the barrel for it will fit and your done .. range improves by about 20 feet    

nerf tech target mod

                       today I'm going to show you how to mod the Nerf tech target

                          open your Nerf gun this is what is should look like

pull this piece out

throw this stuff in the garbage

plug this hole on the barrel with hot glue

put it back together and you done.

nerf grenade test

How to Make a Nerf Grenade

Today I'm going to show you how to make a simple Nerf grenade from normal things that a modder might have.

                         We will start by getting the Plunger Rod off a Nitefinder.

             And then get a longstrike/recon/raider/some king of big spring like this.

 

Now get some PVC, the bigger it is the more darts can fit in it!

Now get a soda can and cut the bottom of it out, (To fit in your PVC) And then drill a small hole in the middle.

This is what it should look like when put together.

Now put the plunger rod that you just made and put it in your PVC and tape the bottom for the spring doesn't fly at you.

I tryed to make this out of stuff someone might have laying around in there garage.

nerf raider mod

my first modded nerf raider with extra long barrel!

my nerf maverick

my modded nerf whiteout series maverick

nerf longstrike mod

this is my first nerf longstrike and my best paint job yet!